検索結果

... at a detection range of 25 mm required for the location of the sensing object, the setting distance of Sensor Head becomes 95mm. 30.10 Model ･ Do not peel off or probe the ventilation film with a sharp-pointed object. If you ...

.... Do not exert unnecessary force to turn the control at the upper or lower limit positions as this might damage the control. Item Mounting fixture can be attached on each side. Workpiece Focus can be verified by the green guide light. Adjust ...

...(3) RS-232C PULL OPEN 4 DIN track (sold separately) PFP-100N (1 m) PFP-50N (0.5 m) PFP-100N2 (1 m) (2) 4 SET 1 Exhaust Unit 4.2 Vertilation ･ Install the Controller so that the distance between the Controller and other devices is at least the dimensions shown in the figure below to improve the ventilation. When installing Controller only: 3 (1) (3) ESC Right Wrong 2 (9) PFP-M 2 RUN AUTO ･Attach the Exhaust Unit (supplied) to the Controller when installing other devices adjacently on the same DIN track as the End Plate (sold ...

...CARD MENU ADJ RUN AUTO ESC SET 1 2 3 4 DIN track (sold separately) PFP-100N (1 m) PFP-50N (0.5 m) PFP-100N2 (1 m) 5.2 Ventilation ･ Install the Controller so that the distance between the Controller and other devices is at least the dimensions shown in the figure below to improve the ventilation. When installing Controller only: Min. 15 mm Min.50 mm TRIG signal Mode Input voltage ON current *1 ON voltage *1 OFF current *2 OFF voltage *2 ON delay OFF delay Internal circuit diagram NPN 12 to 24 VDC ±10% 5mA min....

... the front Panel may cause errors. Setting distance L (mm) Model Dimensions Installation distance The following graphs show the relationship between detection range and setting distance for each model of Sensor Head. Values differ according to each model of Sensor Head, ...

... CISPR11 class A . The intended use of this product is in an industrial environment only. 9.8 The following graphs show the relationship between detection range and setting distance for each model of Sensor Head. Values differ according to each model of Sensor Head, ...

... front Panel may cause errors. 17.90 32 Smart Sensor For Model ZFX-C□□ Sensor head unit 0.80 4.5 ZFX-SC50S ･ Do not peel off or probe the ventilation film with a sharp-pointed object. If you so, the specifications of the protective structure may no longer be satisfied. ･ Do not block the ventilation film. Doing ...

...The product is considered to be classified as Risk Group 1 by IEC62471. 2-M4 depth 6 The following graphs show the relationship between detection range and setting distance for each model of Sensor Head. Values differ according to each model of Sensor Head, ...

...INSTRUCTION SHEET 17.9 32 Smart Sensor For Model ZFX-C□□ Sensor head unit The following graphs show the relationship between detection range and setting distance for each model of Sensor Head. Values differ according to each model of Sensor Head, ...

... the power supply separately from other devices. Wiring them together or placing them in the same duct may cause induction, resulting in malfunction or damage. 4. Cleaning ・ Do not use paint thinner, benzene, acetone or kerosene to clean the Sensor Controller. Doing ...

... exclusive power supply to the ionizer. 3. Applicable standards ・EN61326-1 ・Electromagnetic environment : Industrial electromagnetic environment (EN/IEC 61326-1 Table 2) 4. Other ・Do not bring your fingers or metal objects into close contact with the discharge needles. Doing ...

... short-circuited. • High-voltage lines and power lines must be wired separately from this product. Wiring them together or placing them in the same duct may cause induction, resulting in malfunction or damage. • Avoid connecting or disconnecting connectors while the product is powered on. Doing ...

... air by corona discharge and blowing ions on the charged object by a fan. • To neutralize electricity, proprietary mixing variable DC mechanism is used to materialize quick neutralization and excellent ion balance. • Its Auto Ion Control function maintains the best ion balance. • Indicators are equipped ...

... air by corona discharge and blowing ions on the charged object by a fan. To neutralize electricity, proprietary mixing variable DC mechanism is used to materialize quick neutralization and excellent ion balance. Its Auto Ion Control function maintains the best ion balance. Indicators are equipped ...

... short-circuited. • High-voltage lines and power lines must be wired separately from this product. Wiring them together or placing them in the same duct may cause induction, resulting in malfunction or damage. • Avoid connecting or disconnecting connectors while the product is powered on. Doing ...

... warning Indication WARNING Indicates a potential hazardous situation that improper handling may cause death or serious injury. WARNING Be sure to configure the circuits for safety protection such as emergency stop circuits, interlock circuits, and/or limit circuits to the external control circuits ...

... must be within the rated range. 5. Use the power supply within the rated load. 6. Dispose of this product as industrial waste. 4. Cleaning ・Do not use paint thinner, benzene, acetone or kerosene to clean the Data Storage Unit. Doing ...

... moderate injury or in property damage. ●Alert Statements in This Sheet WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Do not disassemble the product. Doing ...

... moderate injury or in property damage. ●Alert Statements in This Sheet WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Do not disassemble the product. Doing ...

... to PRECAUTIONS FOR SAFE USE on the Instruction Sheet of the dedicated Controller (ZW-CE1□□/ZW-C1□□□). • Tighten the mounting screw to the torque specified in this instruction sheet. • Always turn off the power of the main unit before taking the following actions. Not doing ...