検索結果

.... ' # $ Recommended Plug and Hood Model Manufacturer Plug: XM2A-0901 OMRON Corp. Hood: XM2S-0911 Pin No. Signal 1 FG(GND) 2 3 4 5 6 7 8 9 SD(TXD) RD(RXD) RS(RTS) CS(CTS) NC NC NC SG(GND) Name Protective frame ground Send Data Receive Data Request to Send Clear to Send Not connected Not connected Not connected Signal ground 41 Section 2-6 RS-232C Wiring 2-6-2 Wiring Only use a shielded RS-232C cable. The maximum cable length is 15 m. Standard Wiring Z300 External device Signal Pin No. Pin No. Signal...

...Connector The V530-R160's RS-232C/422 Connector is a D-SUB female connector (M2.6). The pin allocation is shown below. 9 8 7 Signal Function 4 1 FG Protective frame ground 3 2 SD RS-232C 2 3 RD RS-232C 1 4 NC Not connected 5 RDB(RD+) RS-422 6 RDA( RD- ) RS-422 7 SDB(...

... is a 9-pin D-SUB female connector. The pin allocation is shown below. 5 9 8 4 3 7 2 6 1 Pin 1 Signal Name FG Protective frame ground 2 SD For RS-232C 3 RD 4 NC Not connected 5 RDB(+) For RS-422 6 RDA(-) 7 SDB(+) 8 SDA(-) 9 GND Signal ground The following plug and hood are recommended and are available from OMRON. Model 4-2-3 Model No. Plug XM2A-0901 Hood XM2S-0911 Wiring The maximum cable length is 15 m for RS-232C or RS-422 RS-232C Wiring F160...

... Average Measurement item Judge JG SeeAlso Meaning Judgement result Dens average AV Density average for measurement result Dens deviation DV Density deviation for measurement region Ref. average SA Density average when measurement region drawn Ref. deviation ...

... 9-pin D-SUB female connector. The pins are arranged as follows. 㪌 㪐㪏 㪋㪊 㪎 㪉 㪍 㪈 Pin No. Signal name Function 1 FG (GND) Protective frame ground 2 SD (TXD) Transmission data 3 RD (RXD) Reception data 4 RS (RTS) Request to send 5 CS (CTS) Clear to send 6 NC Not connected 7 NC Not connected 8 NC Not connected 9 SG (GND) Signal ground Use a compatible connector. Recommended Model Manufacturer 34 Model Plug OMRON Corporation XM2A-0901 Hood OMRON Corporation XM2S-0911 Setup Manual SECTION 3 Connecting External Devices Wiring The ...

... 9-pin D-SUB female connector. The pins are arranged as follows. 㪌 㪐㪏 㪋㪊 㪎 㪉 㪍 㪈 Pin No. Signal name Function 1 FG (GND) Protective frame ground 2 SD (TXD) Transmission data 3 RD (RXD) Reception data 4 RS (RTS) Request to send 5 CS (CTS) Clear to send 6 NC Not connected 7 NC Not connected 8 NC Not connected 9 SG (GND) Signal ground Use a compatible connector. Recommended Model Manufacturer 38 Z550 Model Plug OMRON Corporation XM2A-0901 Hood OMRON Corporation XM2S-0911 Setup Manual setup.book Page 39 Friday, June ...

... to 100 Ω or less. 3-3 RS-232C Interface Connections Signal name 20 Symbol Signal direction Input Output Pin No. Safety ground or earth ground GR Signal ground or common return SG line Send data SD ----- ----- 1 9 --- ❍ 2 Receive data Request to send RD RS ❍ --- --❍ 3 4 Can send 5V CS 5V ❍ --- --❍ 5 6 Section 3-3 RS-232C Interface Connections Connecting a Single ID Controller Only RS-232C port RS232C SYSMAC CJ1G-CPU44 PROGRAMMABLE CONTROLLER OPEN RUN ERR/ALM INH PRPHL COMM BKUP IN OUT 0 1 2 3 4 0 1 2 5 6 7 8...

... 2 3 4 5 Fitting 10 1 6 7 NC Pin No. 1 Pin No. 1 Signal name 4-4 ZS-DSU User’s Manual 8 9 Signal name NC SD(TXD) 2 2 RD(RXD) RD(RXD) 3 3 SD(TXD) RS(RTS) 4 4 NC CS(CTS) 5 5 SG(GND) NC 6 6 NC NC 7 7 RS(RTS) NC 8 8 CS(CTS) SG(GND) NC 9 9 NC 10 Section 4 RS-232C Input/Output Setting the Communication Specifications Set the RS-232C communications specifications. Match the communication specifications of the ZS-DSU to ...

...Data bit Parity bit Stop bit Total 1 8 Even 1 11 Even parity (Pin arrangement) Pin No. Signal name Symbol Direction Comment 1 1 9 2 Send data SD Input 3 Receive data RD Output 4 Request send RS Input 5 Clear to send CS Output 6 +5 V input 5V Input 5 VDC±5% 7 0 V input 0V Input Internally connected to SG Signal ground SG --- Internally connected to 0V 2.1 IDR/W head: Model V700-HMD13 Communications section 9-pin D-SUB connector plug, with M2.6 lock screws Power supply Section 2 Power supply...

...1 10 15 m max. (Pin arrangement) Pin No. Signal name Symbol 1 1 5 6 9 Direction Unused 2 Receive data RD Input 3 Send data SD Output 4 − 5 Signal ground 6 − 7 8 − Output SG − − Input Request send RS Output Clear to send (CS) Input 9 Comment Normally OFF Leave this pin OPEN. Normally OPEN during service Not functioning Unused 2.1 CIDRW controller: Model V700-L21 Character format (E4 SECS I, fixed) Section 2 Communication standard ■ Cable connection example Connect the upstream controller to the CIDRW controller ...

...1 Pin No. Signal name Function Communications Interface Check code (error detection method) Start bits 1 Section 3 Sync Signal direction 1 --- Not connected --- 2 RD Receive data Input 3 SD Send data Output 4 --- Not connected --- 5 SG Signal ground --- 6 --- Not connected --- 7 RS Request to send (Always ON during operation) Output 8 CS Clear to send Input 9 --- Not connected --- Control of RS Signal from Host When using 1:N connections through an RS-232C interface on the host, the RS signal from the host must be input to the Link Unit's CS signal. Turn OFF ...

... Preparation Pin Arrangement of the Host Device Interface Connector V600-CH1D-V2 Communications Preparation Section 2 V600-CH1D-V2 5 1 Signal 1 --- Signal direction --- RD Hand-held Reader Writer to host device Send data ...

... Wiring RS-232C Interface Connections (V680-CA1D) Signal name Signal direction Symbol Input Output Pin No. GR No No Shield Signal ground or common retrace line SG No No 5 Send data SD No Yes 3 Receive data RD Yes No 2 Request to send RS No Yes 7 Clear to send CS Yes No 8 Connector Pin Arrangement When Viewed from the Controller ID Controller Host device Shield (Shielded wire) Note 1. Ground the shielded wire on either the Controller side or the host device side to prevent operation errors. Note 2. Internally short-circuit pins 7 (RS) ...

...Prepare a connector, whichever is applicable. Recommended part: XM2A-0901 (plug) XM2S-0911 (hood) 5 4 9 8 3 2 7 6 1 Pin No. 1 Signal Name Description FG(GND) Protective ground 2 SD(TXD) Transmission data 3 RD(RXD) Reception data 4 NC Not connected 5 NC Not connected 6 NC Not connected 7 NC Not connected 8 NC Not connected 9 SG(GND) Signal ground ● Setting the Communication Specifications Set the RS-232C communications specifications. Match the communication specifications of the ZUV to those of the external device. FUN Mode-[SYSTEM]-[COMM PORT] Setting 4-10 ZUV...

...). The connector is compatible with the connection port on the IBM PC/AT or compatible. 2D code reader V400-H111/211 Special round connector IBM PC/AT or compatible D-sub, 9-pin Name Pin No. Name - 1 SD...

...the PC to the port.  Connector: D-sub 9pin (male), inch screw (#4-40) 㪈 㪌㪐 㪍 Pin No. Name Function I/O 1 --- --- --- 2 RD Receive Data IN 3 SD Send Data 4 --- --- --- 5 SG Signal Ground --- 6 --- --- --- 7 RS Request to Send 8 CS Clear to Send IN 9 --- --- --- OUT OUT UHF RFID System User's Manual 21 SECTION 2 Specifications and Performance (3) Ethernet Interface This port is used to connect the host to the reader via Ethernet. To connect them, use the commercial cable 10/10Base-T.  Connector: RJ-45 (8 pin) LINK ...

... ID Controller. 26 RFID System Operation Manual Section 2 Installation and Wiring RS-232C Port ■ Pin Arrangement Abbre- Signal direction viation Input Output Pin No. Signal name • Pin Arrangement 5 SG --- --- 2 ...

...PLC side (Note 1) Fitting section 10 1 1 2 6 NC Pin No. 1 Pin No. 1 Signal name 3 7 4 8 5 9 Signal name NC SD(TXD) 2 2 SD(TXD) RD(RXD) 3 3 RD(RXD) RS(RTS) 4 4 RS(RTS) CS(CTS) 5 5 CS(CTS) NC 6 6 NC NC 7 7 NC NC 8 8 NC SG(GND) NC 9 9 SG(GND) 10 Note 1: A plug type connector is used for the PLC side. ZFV-C User’s Manual 105 Section 5 Setting USB/RS-232C Communication Specifications ● RS-...

.... • Install firewalls to shut down unused communications ports and limit communications hosts and isolate control/monitor systems and equipment from the IT network. • Use a virtual private network (VPN) for remote access to control/monitor systems and equipment. • Scan virus to ensure safety of ...

...supply device Omron Corporation PC 24VDC Recommended: OMRON S8VS-03024 2D code reader V400-F050/250/350 Special round connector DOS/V PC D-sub, 9-pin Name Pin No. Name - 1 SD RD 2 RD SD 3 +24V ER 4 GND SG 5 TRIG DR 6 RESET RS 7 RUN CS 8 OK/NG - 9 ERROR Shield wire Connector cover BUSY +24 V (Brown) 0 V (Blue) Not used with RS-232C communication. TRIG (Pink) RESET (Orange) RUN (Green) OK/NG (Black) ERROR (Gray) BUSY (Yellow) (View of mating section) 60 V400-F050/250/350 User’s Manual Section ...